OL-TA Series

The OL-TA sensor series consists of a very precise thickness gauge (0.01% of the measured range).

The maximum measurable range is 2500 millimiters.

The OL-TA series allows, depending on the sensor chosen, to be connected via RS485 or USB. On request the connection can be analog.

The presence of several anchoring points in the sensors housing allows for different and effective fixing for each applications

Electrical Specifications

Available Wavelengths (nm)	From 700 to 1770	From 635 to 690	520	From 375 to 488
Available power outputs (mW)	0.6—10^*1	0.6-10^*1	0.6-10^*1	0.6-10^*1
Supply Voltage (V)	5 or 12V to 28 Vdc/Vac	5 or 12V to 28 Vdc/Vac	12V to 28 Vdc/Vac	5 or 12V to 28 Vdc/Vac
*Operating Current (mAh)^1**	From 2 to 60^*1	From 2 to 60^*1	From 2 to 60^*1	From 2 to 60^*1
TTL Modulations	Available on request
Electrical isolation	Potential-free housing
Protections	Over temperature protection, reverse polarity and transient protection (ESD, burst & surge)

Optical Specifications
Beam size at aperture				°/e2 60
Ray stability (mRad/°C)				0.01
*Fan angles^1**				10°, 15°, 20°, 30°, 90°, 110° (Gaussian line profile)
Line straightness				<0,05 %
Line uniformity				<25 %
*Optics^1**				Point elliptical, point circular, multi line, crosses, grids ecc.
Focus range				10mm up to 10.000mm

^*1 Upon request, lasers and their accessories can be customized to suit individual needs.

^*2 Depends on wavelength and power